May 08 2008
Casting a Memory
Although I enjoy the reliability and strength of my modern graphite, Pfueger rod, there tends to be a great joy in casting my grandfather’s handcrafted split bamboo rod. The rod is a ten and a half foot bamboo rod that he acquired long before I was born. My grandfather passed away before I was old enough to really remember him. Although this is true, there is a certain connection that can be made, and a certain joy that can be found in knowing that I am casting the same rod that he too caught numerous fish on. Through this, it makes it possible to, although living in different times, share something with my grandfather.
For those fishermen out there who know what I am talking about, there are a few things that you should keep in mind whenever casting an antique rod. Firstly, for anyone who has ever disassembled an old bamboo rod, you have surely found that the metal couplings, that connect the different sections of rod, tend to stick, and seem to be nearly impossible to take apart. To combat this issue, it is best to lubricate the metal tags prior to assembly. This can be done using any synthetic lubricant, but must be done each time the rod is assembled. I have found that it is easiest simply to run the male end of the coupling through your hair, allowing the oils to lubricate the metal, or simply use a small amount of ear-wax. Either will suffice. Once the rod is assembled it is important to remember not to push the rods to their limits. If the rod has sentimental value to you, just remember that you can not go out and buy a new one. I recently broke the tip off of one of my grandfather’s rods. Although I did have a second tip piece of the rod, it was truly a reality check; ensuring that it would not happen again.
When disassembling a rod, it is best to not try to take it apart normally, but rather hold the rod with both hands behind your knees and use your legs to separate the rod. This will not only make it easier to remove the parts from each other, but it will also ensure that the rod is pulled straight apart, keeping it from twisting and torquing the bamboo rod.
There are also very important things to keep in mind when owning bamboo rods that should not be neglected, such as regularly oiling the rod to keep it from drying out, causing it to be more subject to cracking and breaking under pressure. Many outdoors stores sell such products and can offer further, specific instructions depending on the exact rod that you own.
No related posts.
Related posts brought to you by Yet Another Related Posts Plugin.
Hey, I too inherited a bamboo rod from a relative who recently passed away. I love to cast the rod, but have always run into this problem of seperating the rod after use. I found this infomation very useful, and, for all those unbelievers, ears-wax really does help keep the rod from sticking. Thanks for the advice!